A brief discussion on the common faults and treatment methods of winding machine

A winding machine is a machine that coils something linear to a specified product, usually coiled with copper wire.

The common faults of winding machines are classified as electrical equipment, mechanical equipment, transmission system and pneumatic (if any), in which the electrical equipment is divided into strong and weak electric systems. the manufacturers of fan winding machines usually take into account the alarm of vulnerable and common fault locations in the design, application and maintenance of their CNC machine tools. Not only alarm data such as sound and light are provided on the display or control panel, but also protection control instructions are sent. Make the operating system power down or stop working to ensure safety and avoid the expansion of common failures.

Usually, the fan winding machine causes the whole equipment error because of the instantaneous common failure, so you can use the hardware equipment to reset or control the switching operating system power supply to eliminate the common fault. If the operating system storage area due to voltage instability, plug pcb circuit board or rectifier switching power supply circuit undervoltage protection causes confusion, be sure to initialize and eliminate the system configuration. Special attention should be paid to the current backup data records before elimination, and if the common faults can not be solved after reset initialization, hardware equipment replacement detection will be carried out.

In the inspection and repair of the winding machine, the parts suspected to be common faults are replaced with good spare parts, and after the maintenance personnel basically determine the causes of the common faults, they can use these methods to detect the common fault categories more quickly, and make the winding machine quickly enter the normal operation, and then return the broken parts to maintenance, which is the most commonly used troubleshooting method.