A brief discussion on the advantages and matters needing attention of automatic Winding Machine

Automatic winding machine, compared with the ordinary semi-automatic winding machine, has a lot of uniqueness, no matter from the counting range, counting accuracy, specific operating performance, there are many unique.　

The automatic winding machine of CNC machine tool is composed of two parts: counting speed regulation and electromechanical installation engineering control. The part of counting speed regulation is mainly composed of controller, winding motor, speed regulation circuit, dry spring sensor, counter, Taiwan circuit and input. Electromechanical installation engineering control-the part is composed of electromechanical installation engineering control, wire arrangement structure and gear hopping mechanism.

In the part of counting speed regulation, the speed regulation of thyristor is mainly used to control the motor of the winding machine, and then the data signal of the number of turns of the winding motor is sent to the binary addition counter according to the dry spring sensor. When the number of loops of the counter is the same as the number of loops obtained by the input, the data signal is sent to the controller by the coincidence circuit to control the electromechanical I-range control circuit.

In the configuration parts of the automatic winding machine, the transmission line crossing structure is immediately in direct contact with wire and cable, such as silk-covered wire and cable. the design and selection of the structure and material of this part will directly affect the damage of wire and cable and the stability of wiring. Different wire and cable winding process configuration of transmission line cross-wire structure material is different.

As we all know, the winding machine is a kind of precision manufacturing machinery and equipment, which is widely used in transformer manufacturers. There are strict requirements on the working environment and production process. The operation of one winding mentioned earlier has a great influence on the output power of the motor. At present, there are two kinds of commonly used winding machine controllers. One is a general-purpose controller supplied by integrated suppliers, and the other is a controller developed by manufacturers. The common problems of the controller are strong and weak electricity control positions and buttons. This kind of problem cannot be dealt with by the customer, and the manufacturer must be informed to carry out maintenance. The problem of the frequency converter is also more common, and the problem can be identified according to the inspection of the frequency converter display operation interface. In the course of operation, customers with motor problems should pay special attention to whether the motor has abnormal noise and whether the temperature is normal. Suspend the load operation during the operation of the machine equipment; the brake is a consumable accessory, which should be adjusted immediately after the winding machine has been used for a long time and replaced if necessary.