What is the cause of the misalignment of stator winding machine?

The stator winding machine is composed of winding main engine, automatic wiring device, layer insulation supply device, adjustable force cable distribution frame, and winding, folding and winding function, pneumatic system, PLC control and servo system. With a high degree of automation, complete functions, strong power and other advantages. After a few years of winding machine is more prone to some problems. The following winding machine manufacturer HengYanCheng in view of some common problems for you to say:

1. The wiring is not neat. According to the situation, we need to analyze whether the problems occur during normal processing or after changing the product debugging. The former is generally a hardware problem. The latter is usually a setup problem. The hardware problems are usually loose fixture, loose fastening screw of the wiring mechanism, poor lubrication of the wiring mechanism, which leads to heavy load of the stepper motor and irregular wiring caused by stepping motor.

2.the spindle stopping position is not accurate. The inaccurate stopping position of the spindle is generally caused by brake failure. For example, the brake pad is loose, or the brake pad is worn. It is also related to the setting of brake time. If the brake time is too short, the stopping position of the spindle will not be allowed. Brake pads need to be replaced or. Adjust the braking time.

3.the number of winding is not allowed, such as the winding machine is not allowed to count, generally due to the sensor, or controller hardware problems, this situation can not work winding machine, generally notify the manufacturer for maintenance.