Inertia force caused by the operation of parts of automatic winding machine

There are all kinds of automatic winding machines in the sales market, but meticulous users can notice that their names have certain standards and basis, and they can easily grasp the main uses of the equipment according to the name. here, we must first introduce the classification of automatic winding machines in detail.

In the whole process of winding, the fully automatic winding machine will hear a very small "uh-huh" sound, which is also the sound of motor operation; when the shaft rolls, it will hear the "stroke" sound of the slide rail rolling; sometimes there will be the sound of steam released by the pump, which is more pleasant on the whole and will not produce a very harsh sound, and experienced personnel can use the sound to distinguish whether the winding machine is abnormal or not.

If the screw is not tightened or the screw must be installed but not installed in this position, the inertia force caused by the operation of the parts of the winding machine is very likely to cause the parts to loosen, and when it is more serious, there will be a collision, so when you hear the knock, you must turn off the equipment and check the equipment quickly. If the base of the winding machine is not heavy enough, or the ground is uneven, the winding machine will shake in the course of operation, and there will be a "click" sound; there is not enough grease in the rolling bearing, and the "sizzling" sound can be heard in the rolling bearing room of the winding machine; the rigid beads in the rolling bearing are damaged, and there is a "gurgling" sound in the operation. The loosening of the motor rotor parts, such as the load-bearing screw on the inner fan blade of the cage motor rotor, or the motor rotor shaft loosening, will cause the winding machine to cause impact sound; the shaft deformation or rolling bearing damage, the winding machine will also cause vibration and uneven friction sound. The bright skin damage of the cable leads to the intersection of the two cable lines, resulting in a "prickling" sound, but it has already led to short-circuit failure, and more serious ones will lead to damage to electronic components, so daily inspection and maintenance is more important than solution.

What is explained above is the inertia force caused by the operation of the parts of the automatic winding machine. I hope it will be helpful to you after reading it. If you want to know more about the automatic winding machine, welcome to consult the customer service online or call our service hotline (upper right corner of the website). We will provide you with intimate service wholeheartedly!