Function and debugging method of automatic Winding Machine

Automatic winding machine not only has strict mechanical parts, but also equipped with a strong electrical equipment control system, combined with electrical equipment control, sensor technology, mechanical transmission. Compared with other electrical processing equipment, the calibration method of pneumatic machinery and equipment is much more complicated and refined.

The calibration method of automatic winding machine can be used in the commonly used winding production process with frame inductance coil. the key is to introduce three important winding technical parameters: specific winding position, enamelled wire specification and winding width.

The specific position of the automatic winding machine is simply the starting point of the winding on the frame. The specific position of the starting point is closely related to the head of the inductor coil and the type of the inductor coil. The detailed data about the specific location of the winding can usually be measured according to the detection function of the machine and equipment control system. The relevant staff can also use manual methods to measure. Use the ruler for real detection with the fixed point as the reference point, and pay attention to the winding direction of the inductor coil when setting this point.

The commonly used enamelled wire has different wire diameter, whether the enamelled wire specification is accurate or not will directly affect the effect of the wire row. The use of different enamelled wire should add different wire diameter adjustment value, copper wire is not easy to be thinned, the adjustment value is added around, aluminum wire is easy to be stretched according to the tension of winding machine equipment and cross-wire machine equipment. The range of adjustment value is larger.