Brief discussion on the common problems of stator winding machine

Stator winding is mainly in the way of inner winding and external winding, and needle winding is often used in inner winding, which is more convenient and tighter in comparison.

The use principle of the stator winding machine is that the motor motor pulls the reversing inner wheel and then pulls the small wheel on the transmission shaft, turning the big wheel by hand can turn a few more times, and a wireframe is placed on the shaft with a counter. When the shaft is running, the number of turns is displayed through the number of turns inductor information, so that you can know the number of coils. If you wind a large coil, you can put the rocker around the transmission shaft once and for all.

In some cases, when the stator winding machine equipment manufacturer leaves the factory, the machine and equipment has already been calibrated, but after being assembled by the user, there are all kinds of problems, and the production and processing of the machine and equipment is unstable. It may be that the manufacturer's own technical level is not good, or the whole process of logistics and transportation is bumped into. However, in many cases, the direct impact of the assembly indoor environment will also lead to the unstable operation of the stator winding machine. What are the actual reasons?

1. The temperature and humidity of the assembly indoor environment, winding machines and equipment and other mechanical equipment are the same, there are a lot of electronic components above, if the ambient temperature is high, or the environmental humidity is high, it is easy to have an impact on the circuit board to a certain extent, or electrostatic energy, which directly affects the stable performance of machinery and equipment, so we must pay special attention to the indoor environment before assembly. Assemble in a dry, ventilated place as much as possible.

two。. The power supply is unstable and fluctuating, so it is easy to lead to the repeated restart of the winding machine equipment, which will directly affect the stable shape of the machine and equipment, and the use is not smooth, which can protect the power supply voltage and ensure the stability of production and processing.

3. Electrostatic energy has a great direct impact on mechanical equipment, so we must do a good job in the grounding device.