Brief discussion on function of automatic winding machine

The winding machine can be understood from the name that it is used for winding wire, coiling wire goods to stable objects, but here we are mainly talking about the winding of stator rotor goods, and the key wire is enamelled wire.

The basic principle of the winding machine is related to the winding technology. When there is a winding diagram of the stator rotor, the corresponding winding program flow will be made, and after it is imported into the PLC system, it can be adjusted. When the calibration is finished, it will be a whole set of automatic process, press and hold the opening button, and the wire nozzle will run on the line gradually. According to the winding procedure flow, the flying fork winding is often used in the external winding machine, and the inner winding machine is usually wound up and down. After walking the whole link, the problems can be stopped during the period, and the rate within the permitted standard can be adjusted. The specific performance is in the following three aspects: self-arrangement, self-winding, and self-transposition. when the thread is wound, the machine and equipment will cut the wire by themselves, and then the goods can be removed and replaced by a stator commodity. If you want to produce and process other goods, take out the mold, change the mold, and reuse it in that way, resulting in an assembly line, which can complete the mass production of the stator rotor.

With the rapid development and continuous progress of science and technology and the increase in the demand of industrial production, the traditional winding method has been unable to meet the winding demand of stator rotor, and has been gradually replaced, and new automatic winding machines are gradually pouring into the market. gradually used in different industries.

If the winding coil of the self-motor winding machine is relatively flat, the function of the automatic winding machine will be better. However, in the specific winding machine technology, there are likely to be problems such as coil asymmetry, wire coincidence on both sides and wire shedding.

It is necessary to ensure the quality of the winding die and frame of the motor winding machine, because they are the key parts of the enamelled wire and forming link, which will have a corresponding impact on the style of the coil in the loading and unloading process. It is necessary to ensure that different components are fastened. In order to achieve this effect, the quality of the frame is a key factor in coil forming.

Accurately set the winding parameters of the winding machine. Motor winding machine equipment is a kind of mechanical equipment with a high degree of automation, which can complete the linkage of various components. The setting of the parameters of the automatic winding machine determines its operation link. Setting accurate parameters can make the automatic winding machine control system play a better role and end the high-quality coil winding link.

In the winding link of the winding machine, its auxiliary technology, that is, tension control, has a greater relationship with the winding accuracy. The safety tension of enamelled wire should be taken into account when setting. At the same time, it should be adjusted according to the specific process and technical conditions. The accurate setting of the tension value will have a great impact on the coil forming.