Debugging method of automatic Winding Machine

The automatic winding machine not only has precision mechanical parts, but also has some electrical automatic control system, which combines electrical control system, sensor technology, gear transmission, pneumatic equipment and other components. Its adjustment mode is much more complicated and meticulous than other electrical production equipment. We have accumulated a little regulation mode of winding equipment in the field of automatic winding equipment production and processing for many years.

How to set up the winding part: what is the winding part? To put it simply, it is the starting point of the gradual winding on the frame, which is closely related to the left and right side of the electromagnetic coil and the type of electromagnetic coil. Generally speaking, the actual standard value of the winding position can be measured according to the measuring function built into the automatic control system of the equipment. The actual operation staff can also choose the manual method to measure, take the support point as the positioning point to apply the ruler specific measurement, and pay attention to the winding orientation of the electromagnetic coil when setting this point.

Enamelled wire specification setting: everyone's common enamelled wire has different wire diameters. Whether the enamelled wire specification setting is correct or not will directly affect the effect of wire arrangement. Enamelled wire using different materials must add different wire diameter adjustment values. Copper core wire is not easy to be drawn down. Its adjustment value is about 0.02, aluminum money is easy to be stretched after the tension of winding equipment and crossing equipment, and its adjustment value is very strong, 0.02-0.2 is all permissible in the middle.

The setting of the total width of the winding: the understanding of the total width of the winding is the distance between the gradually winding part and the end of the winding. Generally speaking, this value directly reflects the length of the frame that must be wound. When setting, we must take into account the influence of the fine shape variable of the applied frame on the total width of the winding, and we should choose the comprehensive measurement as the total width of the winding.

What is explained above is the debugging method of the automatic winding machine. I hope it will be helpful to you after reading it. If you want to know more about the automatic winding machine, welcome to consult the customer service online or call our service hotline (upper right corner of the website). We will provide you with intimate service wholeheartedly!