Tension adjustment method of automatic winding machine

The basic equipment composed of automatic winding machine is composed of mechanical parts and electrical equipment control system, and the starting position, enamelled wire specification and total winding width are the three key winding parameters in the application of automatic winding machine. How to operate the tension adjustment method of the automatic winding machine?

There is no fixed position at the starting point of the gradual winding on the skeleton, and the position and the left and right of the solenoid are determined by the type and specification of the solenoid. Generally speaking, the actual starting position and standard value can be measured only by the accurate measurement of the equipment control system. Silk-covered wires in daily application have different cable diameters, and different enamelled wire specifications will cause the actual effect of different wire rows. In the application of silk-covered wires of different materials, we should pay attention to adjust the actual standard value of the cable diameter, so that the copper core wire is not easy to be deformed.

Of course, when setting up, we must consider the small shape variables caused by the applied force, all of which will cause some harm to the total width of winding. Therefore, we should choose a variety of accurate measurement methods to take the minimum value as the total width of winding. As we all know, the winding equipment is beneficial to the cotton yarn reeling machine on a moderate spool composed of cylindrical or flat tapered cross reeling machine spools. Then the tension organization of the fully automatic winding machine is also relatively high-precision, and the key is equipped with two types of rare earth permanent magnet shock absorbers and electromagnetic induction tensioners, and there is no great difference between the two setting methods. all the cross-line method must be composed according to the size of the cable wire diameter, the fine wire must be symmetrical and stable tension sensor, the thick line must be large tension and a certain degree of softness, and should be operated in accordance with the tension requirements in application.

What is explained above is the tension adjustment method of the automatic winding machine. I hope it will be helpful to you after reading it. If you want to know more about the automatic winding machine, welcome to consult the customer service online or call our service hotline (upper right corner of the website). We will provide you with intimate service wholeheartedly!