What operations should be paid attention to before starting the inner winding machine?

The spindle bearing of the inner winding machine refers to the driving force shaft that produces the rotating driving force to drive the enamelled wire to rotate. The spindle bearing configuration of different types and specifications of the winding machine is different. The adjustment of the spindle bearing of the winding machine generally includes the following aspects: out-of-shaft position, parallelism adjustment, additional other winding process. The adjustment of the outlet part is generally due to the fact that the interval between the spindle bearing and the kitchen table in the whole process of winding does not meet the requirements of the production process, and each production process must be designed to work on the interior space. the change of the outlet part should pay attention to the specification of the opening part of the casing, and whether the adjustment will harm the normal operation of other prefabricated components. Parallelism adjustment is the most common, the parallelism between the winding shaft and the mold thimble will cause deviation after running for a period of time, so be sure to check and adjust immediately.

Before starting the inner winding machine, we should carefully consider whether there is dirt on the ground on the winding machine, whether the screws on the winding machine have fallen off, whether the power switch is connected properly, and whether the specifications of the enamelled wire meet the requirements. Check qualified to start, found that common failures should be immediately reported to the catering supervisor or biotech workers for repair. After starting the machine, run it empty first, and pay attention to check whether the wire arrangement, winding turns, reset mode and parking position of the winding machine meet the requirements. If you do not meet the requirements, try to keep going up and down, and adjust again until the guarantee is already required.

The function of the inner winding machine is relatively simple, which can only maintain the counting of electronic components, total output accumulation, positive and negative control of spindle bearings and other simple functions. Single-chip microcomputer is generally used in important modules. At present, most of the automatic control systems of medium and low-grade winding machines on the market adopt this kind of control measures, using single-chip microcomputer automatic control system, compared with the previous hand-drawn winding machine, it has high automation technical strength, light weight and high linearity, which reduces the staff of the construction staff.

What is explained above is that we should pay attention to the operation of the internal winding machine before starting. I hope it will be helpful to you after watching it. If you want to know more about the internal winding machine, welcome to consult the customer service online or call our service hotline (upper right corner of the website). We will provide you with intimate service wholeheartedly!