Process flow description

Manually place the steel sheet in the feeding level of the vibrating mechanism, and arrange the feeding by the vibrating mechanism;

The arranged steel sheets are sent to the material sorting mechanism, and then the steel sheets are divided into the receiving module, a group of 2 items, and positioned again;

The gripper clamp takes the steel sheet out of the splicing module;

The gripper puts the steel sheet into the winding machine, and notifies the winding machine to work after it is full;

The manipulator removes the finished product from the winding machine after detecting that the winding machine has finished winding;

pin immersion flux (this function can be turned off optionally);

pin dipping tin;

To the finished product discharge chute, optional pin up or down;

Finished product output.

Intelligent automatic control of tin furnace temperature;

Automatic scraping of ash on the tin surface of the tin furnace;

Tin surface height detection - the depth of the dip pin automatically adjusts with the height of the tin surface;

Tin furnace timing switch (16 sets of automatic switching time can be set).

6 products on a beat;

Immersion flux, immersion tin 28~35S (depending on product size);

Without immersion in flux, the fastest equipment is 24~30S/cycle (depending on the size of the product).