Maintenance method of winding machine fault

The common faults of winding machines are as follows: electrical equipment, mechanical equipment, transmission system, pneumatic (if any), in which the part of electrical equipment can be divided into strong and weak electricity, and the manufacturers of winding machines usually give alarm to vulnerable and common fault parts in the design, use and maintenance of their numerical control system, and after the alarm circuit is working. On the one hand, sound, light and other alarm information are provided on the display or control panel, while protective control instructions are sent out on the other hand. Power off or stop running the system software to ensure safety and prevent the expansion of common failures.

First of all, according to the fault phenomenon, the maintenance of the winding machine must identify the real root causes and common fault locations of the common faults as soon as possible. in fact, there is no strict limit when these troubleshooting methods are used. sometimes only one way can be used to troubleshoot, or many ways may be needed to carry out simultaneously. The actual effect mainly lies in the working experience of maintenance technicians and their depth of understanding and mastery of the principle and structure of the system. This is not only a necessary quality for maintenance personnel, but also a high requirement for maintenance personnel. it requires maintenance personnel to be familiar with the structure and design ideas of the winding machine and the performance of the numerical control winding machine. only in this way can we quickly find out the cause of the fault and determine the location of common faults. in addition, maintenance is under maintenance for on-site surveying and mapping of some circuits and parts. As a senior maintenance personnel should also have a certain ability to draw engineering drawings.