What is the difference between fully automatic winding machine wind single wire and multi-wire, thi

Brushless motor stator winding process, there are common single wire winding, multiple wire winding, thick wire winding, thin wire winding, according to different needs, winding methods are also different, so the automatic winding machine winding single wire and multi-wire, what is the difference between thick wire and thin wire? Let's have a look!

1.winding single-wire: this is a very common one, most of the outer or inner winding products are single-wound, the wire diameter is between 0.1mm and 1.0mm, as long as there are no special requirements, such as precision wiring requirements, winding is relatively easy.

2.Winding multi-wire: multi-wire parallel winding, mainly looking at the wire diameter, under the wire diameter 0.3mm, can be up to 30 parallel winding, compared with a single line, the winding speed is faster, sometimes multi-wire winding is due to the single wire winding diameter is too thick, very easy to hurt the line.

3.Winding thick wire: generally speaking, when the wire diameter is above 0.8mm, it is a little bit thicker. The problem that often occurs when winding thick wire is that it hurts the line, and the speed cannot be too fast. For thick wire products, generally speaking, the configuration requirements of the winding machine will be higher.

4.Winding thin wire: thin wire, generally speaking, the diameter of the wire is about 0.1mm, the problem that often occurs is the disconnection, so be sure to debug the equipment, the speed needs to be adjusted properly, not too fast, not too slow.

5.The above is the automatic winding machine winding single and multi-wire, the difference between thick and thin wire, different types of products, different needs, should be based on the product, to select suitable high-quality winding machine equipment, in order to achieve twice the result with half the effort!