Configuration and function of automatic Winding Machine

The fully automatic winding machine can wind and wind the wire automatically, and the thread is arranged neatly and the supporting force is stable. Operation: can manually put the stator winding can also cooperate with the robot automatic winding without workers. Automatic calibration and automatic identification of common faults choose the support force response system software, and adjust the support force size immediately according to the requirements typed. Ensure that the supporting force of all motor windings is stable.

The alarm setting of the automatic winding machine, the system software can carry out the alarm according to the alarm level set.And according to the different levels, different alarm shutdown methods are used to disconnect the automatic inspection system, but when the main parameter setting is disconnected and needs to be turned off, the system software will stop the winding, and some workers decide whether or not to do it again. Standard air pressure inspection, the system software sets up the original standard air pressure test. If the working pressure is less than the preset value, the system software will stop running. After the standard pressure response, the system software will start the winding again.

The full-automatic winding machine adopts the coil made of this kind of equipment, which has the advantages of compact structure, small size and high compressive strength. In order to further improve the productivity, the speed ratio of the fully automatic winding machine server is increased from 300rad/min to 500rad/min. The structure of the wire row is raised from two to three ends, that is, three additional coils can be wound at a time. In addition, multi-section (more than 4) parallel winding is selected, and the axial clamping tissue is raised, and the supporting force of each construction reel is operated separately, so that the winding resistance transmission lines are arranged neatly, the turns are inseparable and symmetrical, and the current intensity is symmetrical all over the place. In addition, it is equipped with the uncoiling organization of the end insulation layer and the tightening tissue of the transmission line, and the electronic computer should set a variety of main parameters, which can make the coil inductance carry out at one time, greatly improve the level of automation, and alleviate the labor intensity of the workers.

What is explained above is the configuration and function of the automatic winding machine. I hope it will be helpful to you after reading it. If you want to know more about the automatic winding machine, welcome to consult the customer service online or call our service hotline (upper right corner of the website). We will try our best to provide you with quality service!