What kind of accessories do you have for the wire winding machine?

On the whole, the wire nozzle equipment of the winding machine is relatively large in workload, and the scope of application is also more. In any case, the material quality increases slowly, and the increased material quality is very important. in terms of quality, customers still value it very much, and it is the most important for customers to use it well, and in recent years, At present, the amount of wire nozzles of the winding machine is also constantly rising, and the rising speed is also very fast, which shows that there are also a lot of applications, and now the winder nozzle manufacturers also have cooperation with many manufacturers. the relationship of cooperation has been long, so it is also better in all aspects, and now the role of the wire nozzle of the winding machine is obvious, but we should pay attention to the points that need to be paid attention to. Like what?

1. Meter meter: through the encoder to collect the length of the wire through the roller, the meter can be counted accurately.

two。. Line cutter: after setting the meter to automatically count and trigger, you can complete the trimming action, and after cutting the line, press it with the cylinder.

3. Manipulator wire: the manipulator is fixed to the line position to take the wire, after taking the line through the meter, through the winding and pressing mechanism, and then manually put the line on the winding reel to tie the wire.

4. Winding device: the main purpose is to make the wire into a prescribed style, to determine the distance between the wires, the speed of the winding, and the number of coils, all of which can be set and adjusted according to the production task.

5. Wire arranger: in the winding is used to fix the wire, so that the wound wire products have a certain tension, and fix the wire according to the number of layers.

6. Tie-up transmission structure: through the transmission mechanism to send a certain length of wire to the wire clamping machine.

7. Twist band structure: use the tape to clip the wound wire together, and then tighten the wire product.

8. Transmission structure + wire taking manipulator: clip the wound wire out of the winding structure and put it in the part of the transmission belt.

9. Manipulator feed line: put the wire into the meter, clamp it and put it into the wire mechanism.