Application method of stator winding machine

The stator winding and resistance motor stator does not have a convex pole palm, and each magnetic field is composed of one or more electromagnetic coils embedded according to the corresponding regularity to form an electromagnetic coil group, which is combined into a magnetic field of different polarity after being plugged in, so it is also called hidden pole type. According to the different sorting methods of embedded wiring, distributed winding can be divided into two categories: concentric type and stacked type. In the winding resistance of the grounding device, the low voltage and current is heated, and the slot wedge is made after the insulation layer becomes soft; the contact point of the slot hole is warped open with a scribing board to form a gap between the wire and the iron core, and then the insulation material of the same insulation grade as the motor is cut into an appropriate specification, and the wire and the iron core inserted into the grounding point are inserted into each other, and the insulation paper is folded up after placing the insulation layer at the specific position of the grounding device.

Stator winding machine is a kind of idealized computer-programmable machine that adjusts the turns of 10 winding coils and manually controls the actual operation of the machine. It can be wound continuously and the number of turns of the coils can be displayed automatically on the same frame. When winding to a preset number of turns of the coil, the equipment will automatically stop the brake. With machine and equipment innovation, clear display information, power off maintenance data information, saving copper core wire, accurate number of turns, fast winding speed, etc., it is more suitable for winding copper core wire of all kinds of small and medium-sized, medium-sized and large motors.

Let's talk about the characteristics of the stator winding machine.

1. According to the up and down movement of the wire nozzle and the rotation of the iron core, the wire can be wound according to any motion trajectory. Therefore, according to the change of the computer winding program flow to correspond to different core thickness and different number of iron core pole winding.

2. The method of adjusting the number of threads other than the number of foot-binding circles, and can suspend a specific omni-directional degree at any specific position, making it easy and convenient to cross the line and shorten the overall work efficiency.

3. Product programming is simple and convenient, with unique special software, endless uploads, downloads and storage. It can be mastered easily and skillfully according to simple training.

4. Because the behavior of crossing the wire into the slot is carried out according to the high-performance control system and servo motor, the stability of the specific position of the wire-wrapped wire into the slot can be ensured and the wire-wrapped wire can be shortened.

5. Manual or automatic mechanical hand cutting methods can be selected according to customer needs.