Why is the transformer winding machine better than the ordinary winding machine?

According to the degree of automation, the winding machine can be divided into simple type, semi-automatic type and full-automatic type. The electronic control mode includes numerical control microcomputer single chip microcomputer and IBM computer control. According to the mode of installation, it is classified as desktop machine and floor machine. As the production process of the transformer determines the frequent start-up and constant torque requirements of the equipment, the parameters that the general transformer winding machine needs to set are:

The slow car function setting is also a commonly used parameter, which mainly controls the slow operation of the equipment when starting and stopping, which plays the role of soft start and parking buffering. the correct setting can make the operator have a process of adapting to the pulling force when starting the winding machine, and it will be more accurate when the equipment stops with a buffer. The setting of the number of laps is the number of laps that the equipment needs to run according to the production process, which is divided into the total number of circles and the number of circles corresponding to each step respectively.

The running speed is used to control the rotational speed of the equipment, and the setting of the rotational speed needs to be determined in combination with the production process and the actual working conditions of the winding. Too fast and too slow are not conducive to the forming of the coil, and fast operation will not be conducive to the control of the operators. Increasing the vibration and noise of the equipment, running at too low speed will greatly affect the production capacity and efficiency of the equipment, as well as the torque output of the equipment spindle.

With the progress of science and technology, generally speaking, the use environment of automatic winding machine does not have any stringent requirements, although that said, because the automatic winding machine contains a large number of electronic components, they are most afraid of direct sunlight, moisture and dust, vibration and so on, which can cause electronic components to be corroded and deteriorated, or cause short circuits between components to cause abnormal operation of the winding machine, which should be paid attention to when installing the machine.

For users, it is mainly to pay attention to the protection of the surrounding environment, such as not bringing umbrellas to the production site on rainy days, keeping the production site clean and tidy, and so on. The step-by-step function is used to control the order of equipment operation, which is generally determined according to the production process. The winding of a coil is not only the winding of enamelled wire, but also many other steps, such as wrapping paper layer, package insulation cloth and so on. So the correct setting of step-by-step function will effectively give full play to the efficiency of the equipment.